|
|
|
|
|
|
| Operation time (times/min) |
|
|
| Intensified pressure ratio |
|
|
| Generated hydraulic pressure |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reed switch(RCE/RCE1), Non-contact (RDE/RDE-D),
NPN current sinking(RNE),
PNP current sourcing(RPE) |
|
|
|
|
|
|
|
|
|
|
|
|
3.5V max.(RCE/RCE1/RDE)
4V max.(RDE-D)
0.5V max.(RNE)
1.5V max.(RPE) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red LED(RCE/RCE1/RNE),
Red/Green LED(RDE-D),
Green LED(RPE) |
|
|
5~220V DC/AC (RCE), 5~120V DC/AC (RCE1)
5~30V DC (RNE, RPE) |
|
|
100mA max.(RCE1)
50mA max.(RCE, RNE, RPE) |
|
|
10W max.(RCE/RCE1)(?1)
1.5W max.(RDE), 2W max.(RDE-D)
1.5W max.(RNE,RPE) |
|
|
10mA@24V DC max.(RNE)
12mA@24V DC max.(RPE) |
|
|
0.1mA max.(RDE),1mA max.(RDE-D)
0.01mA max.(RNE,RPE) |
|
|
|
|
?2.8,2C,PUR(RCE/RCE1/RDE/RDE-D)
?2.8,2C,PU(RCE1)
?3.0,3C,PU(RNE,RPE) |
|
|
|
|
30G(RCE/RCE1),
50G(RDE/RDE-D,RNE,RPE) (?2) |
|
|
|
|
|
|
|
|
|
| Max. effective mass (ml) kg |
|
|
| Max. impact speed (v) m/s |
|
|
| Operating temperature (°C) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
? 1. Measuring standard target :
?15.5×?8×5t(Anisotropy rubber magnet).
? 2. Sin wave / X.Y.Z. 3 directions /
3 times each direction / 11ms each time.
? 3. Double amplitude 1.5mm /
10Hz~55Hz~10Hz(Sweep 1min) /
X.Y.Z. 3 directions / 1 hour each time. |
|
|
|
|
|
|
2 wire(RCE/RCE1/RDE/RDE-D),
3 wire(RNE,RPE) |
|
|
None(RCE/RCE1),
Power source reverse polarity;
Surge suppression(RNE,RPE) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPST normally open(RCE/RCE1/RDE/RDE-D),
Solid state output, normally open
(RNE, RPE) |
|
|
|
|
|
|
|
|
|
|
|
| Signal setting range (SJ type) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
