|
| F1: R1/8,M5; F2: NPT1/8,M5; F3: G1/8,M5 |
|
|
| Air, Non-corrosive gases ,incombustible gases |
|
|
|
|
| 12 to 24VDC ±10%, Ripple (P-P) 10% or less |
|
|
| ?2.5ms (chattering-proof function: 24ms, 192ms and 768ms selections) |
|
|
|
|
|
|
|
|
| Operation: 0 ~ 50?,storage:-20 ~ 60? ( No condensation or freezing) |
|
|
| Operation/Storage: 35 ~ 85% RH ( No condensation) |
|
|
| 1000VAC in 1-min (between case and lead wire) |
|
|
| 50Mohm min. (at 500VDC M, between case and lead wire) |
|
|
| Total amplitude 1.5mm,10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X,Y and Z |
|
|
| 980m/s2 (100G),3 times each in direction of X,Y and Z |
|
| Temperature characteristic |
|
| ?2% F.S. of detected pressure (25?) at temp. Range of 0~50? |
|
|
Appro 65g (with 2-meter lead wire),
Appro 35g (with meter connector) |
|
|
300 kPa(Compound, vacuum)
1.5 MPa (Positive) |
|
|
|
| Operating / Setting pressure range |
|
Compound: -100.0~100.0 kPa
vacuum: 10.0 ~ -101.3 kPa
Positive: -0.10 ~ 1.00 MPa |
|
|
|
| Output short circuit protection |
|
|
|
|
|
| Green LED (OUT1) Red LED (OUT2) |
|
|
|
|
| Oil-resistance cable(0.15mm2) |
|
|
Compound: -100.0~100.0 kPa
vacuum: 0.0 ~ -101.3 kPa
Positive: 0.00 ~ 1.00 MPa |
|
|
NPN or PNP open collector 2 outputs
Max. load current: 80mA
Max. supply voltage: 30VDC
Residual voltage: ?1V (load current 80mA ) |
|
| Repeatability (Switch output) |
|
|
|
|
|
| 3 1/2 digit LED display (Sampling rate: 5 times/1sec.) |
|
|
|
|
|
| Analog output (Current Output) ?3 |
|
|
| Analog output (Voltage Output) ?2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Battery / Battery replaceable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
