|
|
|
|
|
|
|
| 12 to 24V DC ±10%, Ripple (P-P) 10% or less |
|
|
| ?2.5ms (chattering-proof function: 25ms, 100ms, 250ms, 500ms, 1000ms and 1500ms selections) |
|
|
|
|
|
|
|
|
| Operation: 0 ~ 50?, storage:-10 ~ 60? ( No condensation or freezing) |
|
|
| Operation/Storage: 35 ~ 85% RH ( No condensation) |
|
|
| 250V AC in 1-min. (between case and lead wire) |
|
|
| 50M? (at 500V DC, between case and lead wire) |
|
|
| Total amplitude 1.5mm or 10G,10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Z |
|
|
| 100m/s2 (10G), 3 times each in direction of X, Y and Z |
|
| Temperature characteristic |
|
| ±3% F.S. of detected pressure 25? (range of 0 ~ 50?) |
|
|
| Approx. 110g (with 2 meter lead wire) |
|
|
|
|
|
| Operating / Setting pressure range |
|
-0.050 ~ 1.000 MPa (Positive) -0.050 ~ 2.0 MPa (High)
-101.3 ~ 10.0 kPa (vacuum)-101.0~101.0 kPa (Compound) |
|
|
|
| Output short circuit protection |
|
|
|
|
|
|
|
|
|
| Oil-resistance cable (0.15mm2) |
|
|
0 ~ 1.000 MPa (Positive) 0.0 ~ 2.0 MPa (High)
-101.3 ~ 0.0 kPa (vacuum)-100.0~100.0 kPa (Compound) |
|
|
NPN: open collector 2 outputs Max. load current : 125mA Max. supply voltage: 30V DC Residual voltage : ?1.5V
PNP: open collector 2 outputs Max. load current : 125mA Max. supply voltage: 24V DC
Residual voltage : ?1.5V |
|
| Repeatability (Switch output) |
|
|
|
|
|
| 3 1/2 digit, 7 segment (red/green) |
|
|
| ?±2%F.S. ±1 digit (ambient temperature: 25 ±3?) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Battery / Battery replaceable |
|
|
|
|
|
|
|
|
|
|
|
| ?±2% F.S. ±1 digit (ambient temperature: 25 ±3?) |
|
|
|
|
?1. Hysteresis value is adjustable within 1~8 digits for one point set and window comparator mode.
?2. If analog voltage output is selected, the analog current output cannot be selected at the same time.
?3. If analog current output is selected, the analog voltage output cannot be selected at the same time. |
|
| Analog output (Voltage Output) ?2 |
|
Output Voltage: 1 to 5V ±2.5%F.S. (within rated pressure range)
Linearity: ±1% F.S.
Output impedance: about 1k? |
|
| Analog output (Current Output) ?3 |
|
Output Current: 4 to 20mA ?±2.5%F.S. (within rated pressure range); Linearity: ±1% F.S.
Max.Load Impedance: 250? at power supply of 12V, 600? at power supply of 24V
OutputMin.Load impedance: 50? |
|
|
|
